This paper introcudes the design workflow and test approaches of a surface-NMR receiver. But the method and technqiues, for instance, signal loop, acqusition board, GPS synchronization, and Wi-Fi network, could also be employed in other geophysical instruments.

High-power transmitters have been playing a significant role in deep electromagnetic exploration. However, a high-power transmitter needs high-voltage support, which is a potential risk for researchers. According to the actual situation of field exploration, we designed a wireless monitoring system. The system offers two advantages, the first of which is high security; the second advantage is simple operation.

Integrated geophysical techniques (ERT, SSR, and GPR) along the conducted profiles at the Great Pyramids of Giza have been successfully used to investigate the groundwater table and support hazard mitigation. The groundwater table elevation is 15 m under the Great Sphinx, which is safe, and at the Nazlet El-Samman it is 16–17 m.

The article deals with the designation of fault detection on the island of Crete. The delineation is based on the integration method of remote sensing and GIS. The crucial finding is how to differentiate between faults and water streams. The results showed a robust approach to fault detection.

To better understand the influence of sample geometry on laboratory measurements of permeability, the permeabilities of sandstone samples with different lengths and diameters were measured. Despite the large range in length, aspect ratio, and volume, the permeabilities of the samples are near identical. This is due to a homogeneous porosity structure and the small grain/pore size with respect to the minimum tested diameter and length. More tests are now needed to help develop such guidelines.

Raw output of spacecraft magnetometers has to be converted into meaningful units and coordinate systems before it is usable for scientific applications. This conversion is defined by 12 calibration parameters, 8 of which are more easily determined in flight if the spacecraft is spinning. We present theory and advanced algorithms to determine these eight parameters. They take into account the physical magnetometer and spacecraft behavior, making them superior to previously published algorithms.

IZA is a high-mountain station located in Tenerife (Canary Islands, Spain, at 28.3º N, 16.5º W; 2373 m a.s.l.) and is a representative site of the subtropical North Atlantic free troposphere. It contributes with basic-BSRN radiation measurements, such as, global shortwave radiation, direct radiation, diffuse radiation and longwave downward radiation and extended-BSRN measurements, including ultraviolet ranges, shortwave upward radiation and longwave upward radiation.

Focused ion beam (FIB) slicing is a widely used technique to prepare ultrathin slices for the microanalysis of geological and environmental samples. During our investigations of the manganese oxidation states in rock varnish slices, we found an FIB-related reduction of manganese(IV) to manganese(II) at the samples’ surfaces. This study characterizes the observed reduction artifacts and emphasizes that caution is needed in the analysis of transition metal oxidation states upon FIB preparation.

This paper presents a novel method to quantify the sizes and frequency of calving events from time-lapse camera images. The calving front of a tidewater glacier experiences different episodes of iceberg deliveries that can be captured by a time-lapse camera situated in front of the glacier. An automatic way of detecting calving events is presented here and compared to manually detected events.

We highlight the development of a low-cost portable sensor array to study magnetic fields in urban areas. Recent advancements in urban science have demonstrated significant utility in characterizing a city based on physical measurements. Magnetic fields of cities are characterized by significant noise; in the case of the San Francisco Bay Area, this noise is dominated by the BART train system. We demonstrate an ability to identify and extract BART noise from the urban magnetic environment.

The existing current recorder is inadequate for continuous recording, precision, bandwidth, dynamic range, and input range. A new full waveform current recorder that is ideal for measuring current signal for electrical prospecting applications is presented. The full waveform current recorder is capable of measuring current with bandwidth from DC to 10 kHz, with a power spectrum density noise floor of 10 A/rt(Hz) at 10 Hz.

We present the design considerations and deployment of an autonomous modular terrestrial rover for ice-sheet exploration that is inexpensive, easy to construct, and allows for instrumentation customization. The rover proved capable of driving over 20 km on a single charge with a drawbar pull of 250 N, which is sufficient to tow commercial ground-penetrating radars. Due to its low cost, low power requirements, and simple modular design, mass deployments of this rover design are practicable.

Towards the complex observation requirements of Fengyun-4 (FY-4) satellites, a new generation of geostationary meteorological satellites from China, instrument observation strategies are proposed on which the instruments' in-orbit daily observations must be based. The strategies have been successfully used in FY-4A in-orbit tests for more than a year. Both the simulation results and in-orbit application results are given to demonstrate the validity of the strategies.

The nonuniqueness of geophysical inversions, which is based on a single geophysical method, is a long–standing problem in geophysical exploration. This paper developed a distributed, multi–channel, high–precision data acquisition system. It can achieve high–precision hybrid acquisition of seismic–electrical data and monitor the real–time quality of data acquisition processes using NB–IoT technology. The equivalent input noise is 0.5 μV and the synchronization accuracy is within 200 ns.

Measurements from the magnetic field instrument on the Cassiope spacecraft were found to be degraded by an artifact of how the instrument tracks the changing magnetic field as the spacecraft orbits the Earth. We present a process to characterize this effect on orbit and compensate for it in the post–processing of the data. This work allows the instrument to accurately track rapidly changing local fields without loss of measurement fidelity and improves the high–frequency noise of the data.

In this paper, we present an approach to represent underlying errors in measurements and physical models in the temporal gravity field determination using GRACE observations. This study provides an opportunity to improve the error model and the accuracy of the GRACE parameter estimation, as well as its successor GRACE Follow-On.

The material in this research paper is intended for specialists engaged in digital processing of geomagnetic field measurements. A technique is discussed that can help to reduce the errors in measurements and can be applied in various tasks of digital processing of geomagnetic data from vector magnetometers and other three-component data. The results of the tests on model and real geomagnetic data are provided for the algorithm along with the conclusions about its possibilities.

Our knowledge of the Earth's magnetic field arises from magnetic signals stored in lavas. In rugged volcanic terrain, however, the magnetization of the underlying flows may influence the magnetic field as recorded by newly formed flows on top. To measure these local magnetic anomalies, we developed a low-cost field magnetometer with superior accuracy and user-friendliness. The first measurements on Mt. Etna show local magnetic variations that are much larger than expected.

Fluxgate magnetometers provide magnetic field measurements for geophysics and space physics. A low-noise ferromagnetic ring core typically determines the noise performance of the instrument. Much of the basic research into producing low-noise fluxgate sensors was completed in the 1960s for military purposes and was never publicly released. We present a manufacturing approach that can consistently produce fluxgate ring cores with a noise performance comparable to the legacy ring cores used today.

Complex and harsh exploration environments have put forward higher requirements for traditional geophysical exploration methods and instruments. In this study, a new distributed seismic and electrical hybrid acquisition station is developed and it can achieve high-precision hybrid acquisition of seismic and electrical data. The synchronization precision of the acquisition station is better than 200 ns and the maximum low-power data transmission speed is 16 Mbps along a 55 m cable.

A software application for streamlining investigations of the Martian atmosphere is described. The main components are a 1-D model of the Martian atmosphere, observations of the Martian atmosphere and a software wrapper. We verify our model using the application. The model and observations agree except over the winter solstice where mechanical heating of the atmosphere, from downward flowing air, is likely warming the atmosphere. We update our model to include this effect.

The first stage of field experiments involving the design and construction of a low power-consumption ocean bottom electro-magnetometer (OBEM) has been completed: this can be deployed more than 180 d on the seafloor with a time drift of less than 0.95 ppm. We found that the inclinations and magnetic data of the OBEM varied with two observed earthquakes when compared to the OBS data. The potential fields of the OBEM were slightly, but not obviously, affected by the earthquakes.

A universal data model is a core to converge big geoanalytical data. We studied geoanalytical instruments, geological samples, and geoanalytical results and give a summarization of comprehensive geoanalytical data. We abstracted the data contents and designed the data model. It can be used for the construction of any geoanalytical data management system, data sharing system, or database by professional or amateur developers. Morever, we highly improved the efficiency of the data model.

Measuring the magnetic field onboard spacecraft requires regular in-flight calibration activities. Among those, determining the output of magnetometers under vanishing ambient magnetic fields, the so-called magnetometer offsets, is essential. Typically, characteristic rotations in solar wind magnetic fields are used to obtain these offsets. This paper addresses the question of how many solar wind data are needed to reach certain accuracy levels in offset determination.

Currently, there exist thousands of unprocessed stereo pairs of satellite imagery which can be used to create models of the surface of Mars. This paper sets out a new open–source and free to use pipeline for creating these models. Our pipeline produces models of comparable quality to the limited number released to date but remains free to use and easily implemented by researchers, who may not necessarily have prior experience of DEM creation.