The study was conducted along the Luangwa River in Zambia. It combines low-cost instruments such as UAVs and GPS kits to collect data for the purposes of water management. A novel technique which seamlessly merges the dry and wet bathymetry before application in a hydraulic model was applied. Successful implementation resulted in water authorities with small budgets being able to monitor flows safely and efficiently without significant compromise on accuracy.

When radio waves from our galaxy enter the Earth's atmosphere, they are absorbed by electrons in the upper atmosphere. It was thought that by measuring the amount of absorption, it would allow the height of these electrons in the atmosphere to be determined. If so, this would have significance for future instrument design. However, this paper demonstrates that it is not possible to do this, but it does explain how multiple-frequency measurements can nevertheless be useful.

Weather balloons are released every day around the world to obtain the latest atmospheric data for weather forecasting. Expanding the range of sensors they carry can make additional quantities available, such as for atmospheric turbulence, cloud electricity, energetic particles from space and, in emergency situations, volcanic ash or radioactivity. An adaptable system has been developed to provide these and other measurements, without interfering with the core weather data.

We use technical methods of instrument development, calibration experiments, and numerical simulations to develop a new type of in situ stress sensor group using fiber Bragg grating (FBG) sensing technology, which can calculate the in situ stress state of surrounding rock mass by sensing the borehole wall strain. This sensor group lays an important theoretical and experimental foundation for the development and application of FBG hole wall strain gauge.

Cosmic-ray neutron sensing (CRNS) is a non-invasive tool for measuring hydrogen pools like soil moisture, snow, or vegetation. This study presents a directional shielding approach, aiming to measure in specific directions only. The results show that non-directional neutron transport blurs the signal of the targeted direction. For typical instruments, this does not allow acceptable precision at a daily time resolution. However, the mere statistical distinction of two rates is feasible.

Better monitoring of soil carbon sequestration is needed to understand the best carbon farming practices in different soils and climate conditions. We, the Field Observatory Network (FiON), have therefore established a methodology for monitoring and forecasting agricultural carbon sequestration by combining offline and near-real-time field measurements, weather data, satellite imagery, and modeling. To disseminate our work, we built a website called the Field Observatory (fieldobservatory.org).

We present an experiment intended to enable extremely low-noise magnetic field measurements. We manufactured fluxgate magnetometer cores using two metal alloys, two geometries, two foil thicknesses, and six different heat treatments and compared the resulting material properties, power consumption, and magnetic noise. Our results suggest that thinner foils, potentially using a new copper alloy, manufactured into continuous racetrack washers may provide excellent performance in fluxgate sensors.

In recent years, imaging of density inside volcanoes using cosmic-ray muons has been studied. In some previous studies, observations were conducted in 2 or 3 directions to obtain 3D resolution. For higher resolution, we tried to observe a volcano from 11 directions using special photographic films. The observation and analytical techniques developed in this study may be applied to other volcanoes and large objects. Reconstructing 3D images of the volcano is in progress using the obtained data.

The quality control and validation activities performed by the Swarm data quality team reveal the good-quality LPs. The analysis demonstrated that the current baseline plasma data products are improved with respect to previous baseline. The LPs have captured the ionospheric plasma variability over more than half of a solar cycle, revealing the data quality dependence on the solar activity. The quality of the LP data will further improve promotion of their application to a broad range of studies.

Soil evaporation is one of the most important water vapor sources on the Earth with multiple and severe consequences; however, there is a relative lack of instruments to measure it. This study describes a simple apparatus making the soil evaporation measurement accessible. The soil evaporation complexity is overcome by measuring the evaporation dynamic under different measurement conditions. A relatively simple measurement correction is then performed depending on the wind speed.

In airborne survey, dynamic flight conditions cause unequal data levels, which seriously impact airborne geophysical data analysis and interpretation. A new technique is proposed to level geophysical data in view of the image space properties. We have confirmed the reliability of the method by applying it to the airborne electromagnetic, magnetic and apparent-conductivity data. The method can automatically extract leveling errors without the participation of staff members or tie-line control.

For the processing of geomatics data, artificial intelligence (AI) offers overwhelming opportunities. The integration of AI approaches in geomatics has developed into the concept of geospatial artificial intelligence (GeoAI), which is a new paradigm for geographic knowledge discovery and beyond. This contribution outlines AI-based techniques for analysing and interpreting complex geomatics data. How AI approaches have been exploited for the interpretation of geomatic data is explained.

The commercial off-the-shelf (COTS) PNI RM3100 magnetometer was tested for single-event latchup (SEL) at Lawrence Berkeley National Laboratory's heavy-ion beam and did not experience any single-event effects at a linear energy transfer >75 MeV cm² mg⁻¹. Coupled with previous total ionizing dose (TID) testing at the University of Michigan and NASA Goddard Space Flight Center that showed no degradation in performance up to 150 kRad(SI), the COTS PNI RM3100 is extremely radiation tolerant.